Kirby Sentria II model
Disclaimer: Goodvac.com is not affiliated with The Kirby Company and/or The Scott Fetzer Company. All manuals and maintenance tips for Kirby vacuum cleaners and repair manuals for Kirby m |
Transmission does not work (inspecting primary drive belt)
Problem:
When the drive/gear is engaged when vacuuming carpets, the machine flips up on the pull back stroke or the automatic push/pull doesn't seem to be working.
Possible Cau |
Not sure what brush roll to buy
My Kirby vacuum nozzle may be from another Kirby vacuum model so I am not sure what Kirby brush roll to buy. What is this light on the nozzle for?
Possible Causes:
Occasionally |
Vacuum is vibrating when pushed forward
Kirby vacuum is vibrating when pushed forward. Why is that and is this something that I have to get fixed right away?
Possible Causes:
This usually happens on some short fiber |
How to replace Kirby N/D pedal and Bracket-Cam assembly
Step by step instructions how to replace Kirby vacuum tech/drive (transmission) pedal and/or Kirby bracket-cam assembly. Pictures available for every step.
|
How to replace Kirby fan blade
How to change Kirby vacuum fan (impeller). List of all tools needed and and pictures for each step to be taken to replace Kirby fan blade from start to finish. E-mail us with questions |
How to replace Kirby power switch
How to replace Kirby vacuum power switch (AKA- safety switch). Step by step illustrated instructions on replacement procedure from start to the last screw.
Disclaimer: & |
Servicing Kirby slide assembly
Problem:
When the drive is engaged, it occasionally “sticks”. That is, it doesn't seem to always want to engage the drive. If the vacuum is rolled back and forth a couple of times, i |
How to replace Kirby belt lifter body (nozzle)
How to replace Kirby belt lifter (plastic knob on the nozzle that you have to turn to get the belt on the Kirby motor shaft)
Disclaimer: Goodvac.com is not |
How much does Kirby vacuum cost?
How much does authorized distributor buys vacuum from Kirby Co?
What is fair price for the Kirby sweeper?
Disclaimer: Goodvac.com is not affiliated wi |
How can I make my Kirby vacuum shiny again?
My Kirby is only few years old. It still works perfect but it is not as shiny as the day I bought it. What do you guys do to make them look so good?
Disclaimer: Goodvac.com is no |
Servicing New Kirby Sentria sweeper transmission
Problem:
I bought new Kirby Sentria not even a year ago. Everything was fine in the beginning bot now when vacuuming handle handle gets stuck in forward or reverse and I have to push |
How to use American switch in European model
How to use 110/120 volt Kirby power switch in 220 /230 / 240 volt Kirby vacuums with electronic module under the motor.
Disclaimer: Goodvac.com is not affiliate |
How are Kirby models different?
What model is my KIRBY?
&
What is the difference between all of these models?
Disclaimer: Goodvac.com is not affiliated with The Kirby Company and/or The Scott Fetzer Co |
Which Kirby Fill Tube do you need?
How to figure out what fill tube your Kirby needs.
Disclaimer: Goodvac.com is not affiliated with The Kirby Company and/or The Scott Fetzer Compan |