Which Kirby Fill Tube do you need?
How to figure out what fill tube your Kirby needs.
Disclaimer: Goodvac.com is not affiliated with The Kirby Company and/or The Scott Fetzer Compan |
How We Rebuild Kirby Vacuums
Kirby vacuum refurbishing varies from shop to shop. Some shops will disassemble the unit down to the last screw while others only dust the vacuum exterior for looks. Our goal is to provide |
AquaMate - I squeeze the trigger but nothing is coming out
Problem:
I am trying to clean my carpet with the AquaMate and when I push the trigger no water is coming out of the tubes. What might be the problem?
Possible Causes:
|
Kirby has no suction (belt and fan are fine)
Kirby runs fine, no weird sounds or smoke. Brush roll is spinning (I know how to put the nozzle properly) and I am sure that fan is fine too - however it still has poor suction. What coul |
Kirby vacuum stinks
My Kirby vacuum stinks.No smoke or not like something is burning. I replacing the disposable bag, tried odor killers, fragrances, leaving it outside for a few days - still smell is pretty |
How to replace Kirby fan blade
How to change Kirby vacuum fan (impeller). List of all tools needed and and pictures for each step to be taken to replace Kirby fan blade from start to finish. E-mail us with questions |
Servicing Kirby slide assembly
Problem:
When the drive is engaged, it occasionally “sticks”. That is, it doesn't seem to always want to engage the drive. If the vacuum is rolled back and forth a couple of times, i |
Can I use Kirby ZipBrush for spot shampoo
Can I use it with carpet shampoo as a spot cleaner? I can't find anywhere if it says that this can be done or not- or will the shampoo get into the motor and wreck it?
|
How can I make my Kirby vacuum shiny again?
My Kirby is only few years old. It still works perfect but it is not as shiny as the day I bought it. What do you guys do to make them look so good?
Disclaimer: Goodvac.com is no |
Servicing New Kirby Sentria sweeper transmission
Problem:
I bought new Kirby Sentria not even a year ago. Everything was fine in the beginning bot now when vacuuming handle handle gets stuck in forward or reverse and I have to push |
Vacuum cleaner testing description
Vacuum cleaner noise, suction, airflow, power consumption testing by GoodVac.com.
Disclaimer:
Tests described below are done in our shop and are setup |
Vacuum cleaner testing and parameters
How vacuum cleaners are being tested and what is important or not to consider before buying a new vacuum cleaner?
Disclaimer: We are not a affiliated with any vacuum cleane |
Rainbow vacuum cleaner E2 model 12 review by Goodvac.com
Disclaimer: Goodvac.com is not affiliated with The Rexair, Inc. (Rainbow vacuum cleaner manufacturer). This review of Rainbow model vacuum model is authored by GoodVac.com is not endo |
How are Kirby models different?
What model is my KIRBY?
&
What is the difference between all of these models?
Disclaimer: Goodvac.com is not affiliated with The Kirby Company and/or The Scott Fetzer Co |