Home > Rainbow > Parts > Aquamate II >

Aquamate 2 Pump Housing TOP
Aquamate 2 upper housing
 
Our Price: $11.00


Free Shipping
Product Code: R-PRT-R11138
Qty:

Description
 
REXAIR RAINBOW AQUAMATE II
CARPET EXTRACTOR UPPER PUMP HOUSING

To remove it you will need to break 4 latches off (use pointy pliers).

Old upper housings can not be reused but new ones can. If you will have to take apart the Aquamate 2 again -  the first time you will need to break those latches again but then just drill 4 holes in lover housing and use 4 screws to hold them together.
New design lower housings have locations where you need to drill pre-marked. We would suggest getting the lower housing and 4 screws now so you do not have to pay additional shipping and wait for the lower housing to come in if you will not succeed in reusing the old lower housing.
Next time just get the screws out and you can remove the housing.

Aquamate 2 upper housing part #R11138

This upper housing will  not accommodate old style tube fittings:
Aquamate 2 old tube fitting
So you need to purchase entire set of:
1. Upper housing
2. Lower housing
3. Male fitting and tubing assembly
4. Double female fitting


WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Rainbow > Parts > Aquamate II